Vinyl flooring made up as follows: polyurethane coated surface
• wear resistant top layer in pure transparent PVC 0,30 mm
• printed layer in pure PVC 0,07 mm (printed with innovative techniques)
• interlayer in PVC 0,82 mm
• underlayer in PVC 0,81 mm.
These layers are assembled via non continuous hot press.
Laying surface must be level, smooth, dry, solid, free from grease and cracks and retain these characteristics over time. During installation, room temperature must be at least +18°C and must remain so for at least 2 days after installation is finished. The flooring is laid by spreading glue onto the surface using appropriate adhesives and following the adhesive manufacturer’s instructions.
Maximum allowed residual moisture for concrete floor is ≤ 2%. Once taken off the pallet, leave the flooring for at least 48 hours in the room where it is to be laid.
It’s recommended to use “short open time” acrylic glues on a suitable floor base. If flooring is to be laid on surfaces with no basement or crawl space, the basement surface must be waterproofed.
Instructions for cleaning and maintenance
The floor can be walked on 24/48 hours after laying: wax treatment is not necessary after the installation as the top layer of the floor is already treated with a pure polyurethane PUR coating. It’s possible to clean and wash with a humid cloth. Use only normal neutral detergent. After years of use, if necessary, treat the surface with PUR treatment, specific for Vinyl flooring.
The colors of the decorations are indicative. Product images may differ from actual product.