Vinyl flooring made up as follows: polyurethane coated surface
• wear resistant top layer in pure transparent PVC 0,55 mm
• printed layer in pure PVC 0,10mm (printed with innovative techniques)
• interlayer in SOLIDCORE 1.85 mm
• stabilizing fibreglass sheet 0,10 mm
• underlayer in PVC 2.4 mm
These layers are assembled via non continuous hot press.
Floating installation on non-combustible substrate, it is recommended to use the mat ROLLSOFT®. The material must be acclimatised in the required room for at least 48 hours at a temperature of about 18°C.
Instructions for cleaning and maintenance
The floor is walked on immediately after the installation. Waxing is NOT required after the installation as the floor is already treated on surface with pure polyurethane (PUR). To be clean with vacuum cleaner and or damp cloth. Use only neutral detergents. After years of use, if necessary, restore the surface made of pure polyurethane (PUR) with appropriate treatment.
The colors of the decorations are indicative. Product images may differ from actual product.